Ultrasound machine pack

1. Clean all the parts that we are going to treat with this device. Do not introduce, for example, the typical chain in which not even the links are visible, with dirt embedded for months. Not because the device cannot handle it, but to avoid excess residue that will break off in the bucket and make cleaning it a cumbersome task.

2. Fill the bucket, which has a maximum capacity of 15 liters, with Relber's special ultrasonic degreaser, until it perfectly covers all the parts that we have introduced for cleaning. Always keep in mind that the pieces must be inserted into the special tray that the device comes with, and never directly on the surface of the bucket.

3. Once we have the liquid and the pieces inside the bucket, we can now connect the device to the power. Never before. We press the power button and now we must choose the temperature. For this we have buttons with the time and different temperatures to choose from. When it has reached the selected temperature. This is when the ultrasound process begins.
You must follow the instructions that appear in the instructions for use book for the different configurations depending on the parts to be cleaned:
- From 10 to 15 minutes and a temperature of 30ºC/50ºC for: brake discs, pads, calipers, cassette and chainrings.
- 15 to 20 minutes and a temperature of 30ºC/50ºC for: chains, bearings, derailleurs, roulettes and controls.

4. When the timer ends the process, we just have to turn off the machine, remove the tray where the pieces are stored and empty the degreasing liquid thanks to the drain tap. Now we must clean the residue that has remained in the bucket with a damp cloth and ready to use it again.